High-pressure coolant systems

The coolant used during metalworking has to meet many expectations. Thus, the selection of the coolant as well as the coolant system requires great care

Thanks to the filters, our high-pressure coolant systems can extend the lifetime of the coolant by up to 100%. Coolant water that is efficiently delivered to the cutting zone helps break and remove the separated chips. The coolant prevents the formation of a built-up edge on the tool, thus increasing efficiency.

Using a good cooling system can also drastically reduce the cost of disposing of hazardous waste.

The coolant systems offered by PREVOTEX are perfectly customizable thanks to a wide range of factory options.

CHIPBLASTER B SERIES

These systems are suitable for providing fixed medium and high pressures. They can be used for CNC lathes or machining centers. It is small in space and simple in design.

B-30/35

M code controlled medium pressure system with one 10 micron filter. It protects the machine tool and the cutting tool with automatic overflow protection and a clogged filter signal. Ideal max. For 15 kW CNC machines. It is easy to move thanks to its rolling design.

B-30/70

M code controlled high pressure system with two 10 micron filters that can be switched between manually. It protects the machine tool and the cutting tool with automatic overflow protection and a clogged filter signal. Ideal max. For 15 kW CNC machines. It is easy to move thanks to its rolling design.

B-30/70H

High pressure system with maintenance-free cyclone filter system that guarantees 2 micron filtration. It has automatic overflow protection. Thanks to the diaphragm pump, it is also suitable for extreme machining tasks. It is easy to move thanks to its rolling design.

CHIPBLASTER F SERIES

These systems are capable of providing constant high pressure. They can be used for CNC lathes or machining centers. Thanks to their modular design, they can be perfectly customized for a given task.

F-30

High pressure system with low footprint. The protection of the machine tool and the cutting tool is ensured by the bag filter design. Ideal max. For 15 kW CNC machines. The multilingual interface helps you with easy-to-read data.

F2-60

The F2-60 consists of two independent 30-liter modules, so it can serve two turret machines. It can deliver 60 liters of transport capacity on demand. Ideal max. For 30 kW CNC machines. The multilingual interface helps you with easy-to-read data.

CHIPBLASTER V SERIES

A key feature of the product line is the adjustable pressure value. They can be used for CNC lathes or machining centers. Thanks to their modular design, they can be perfectly customized for a given task.

V-40

The V-40 high-pressure system automatically delivers the right pressure and amount of coolant for the job. This avoids unnecessary energy consumption, there is no extra coolant transport that would simply be returned to the tank. The large tank helps with thermal stability and reduces the incidence of foaming problems.

V-60

The V-60 is powered by its own lift pump, which delivers refrigerant from the machine tool’s water tank to a 480-liter built-in tank. It then delivers high-pressure filtered coolant to the CNC machine that best suits the machining task. Ideal max. For 30 kW CNC machines with two turret machines. The multilingual interface helps you with easy-to-read data.

V2-80

The V2-80 consists of two independent 40-liter modules, so it can serve two turret machines. It can provide 80 liters of transport capacity for an output demand, but in each case only supplies as much coolant to the tool as is needed to perform the task. Ideal max. For 30 kW CNC machines. The multilingual interface helps you with easy-to-read data.

V2-120

The V2-120 consists of two independent 60-liter modules, so it can serve two turret machines. It can deliver 120 liters of transport capacity on demand. Ideal max. For 60 kW CNC machines. The multilingual interface helps you with easy-to-read data.

CHIPBLASTER U SERIES

The Chipblaster UBV system has been designed to be placed under the LNS bar dispensers. Perfect solution for longitudinal lathes where space is tight

UVB

The UBV is an adjustable system with a maximum delivery capacity of 22 liters / minute. Available with 4 or 8 outputs as required. The coolant is kept clean by a 10 micron filter system.

HIGH PRESSURE SYSTEM ACCESSORIES

PhaSep Coolant Filter

The removal of foreign oil from the coolant of machine tools results in a healthier work environment, thereby reducing health risks, as well as significant savings due to increased coolant life. Thanks to LNS PhaSep’s unique floating oil collection solution, it removes collected foreign oil with 99% efficiency, all in one simple and easy-to-use combination.

Tape skimmer

The removal of foreign oil from the coolant of machine tools results in a healthier work environment, thereby reducing health risks, as well as significant savings due to increased coolant life. The LNS belt oil separator, based on the already well-known operating mechanism, is a cost-effective and easy-to-install, space-saving solution. It can be installed directly on some LNS ChipBlaster high pressure systems.

Coolant cooler

The heat generated during cutting in machine tools can result in premature tool wear, inaccurate machining and longer cycle times. The LNS coolant cooling system provides a reliable solution to eliminate this. It can be set to absolute temperature or to monitor the ambient temperature.

Cyclone filter

The cyclone filter is the most effective solution for extending the life of the coolant and protecting it from chips entering the CNC machine.

Coolant pipe system

The LNS Preci-Jet coolant pipe system provides a fast, flexible, safe and universal solution for delivering coolant to the most important point where cutting takes place at the cutting edge. Highly recommended for high pressure coolant systems.