CNC machine accessories / Collets

Collets and guide bushes

Precision clamping, feed and tool-holding collets, plus carbide-lined guide bushes for cam-type and CNC Swiss-type lathes.

Request a quote +36 30 343 4433

Meister

clamping collets

0.001 mm

max. runout on master arbors

≤ 0.005 mm

bore runout, micro-precision guide bush

2 manufacturers

Schaublin and Serge Meister

UP / MP

ultra- and micro-precision versions

Manufacturers

Two specialists, one source.

The accuracy of collets and guide bushes shows directly on the workpiece, which is why we only supply products from proven precision manufacturers.

Schaublin collets

Dead length and draw-in collets

Feed fingers

ESX and HSC tool-holding collets

Serge Meister guide bushes and collets

Carbide-lined, fixed and adjustable guide bushes

Dead length, draw-in and ER collets

Standard and UP (ultra-precision) versions

Serge Meister

Guide bushes and collets from Serge Meister.

Swiss manufacturer since 1948. From guide bushes to bar loader collets, every clamping element from one source, selected for the machine and the diameter.

Guide bush

Guide bushes

Carbide-lined guide bushes for Swiss-type lathes, in UP quality, in 0.01 mm steps at no extra cost.

Ø0.5–38 mm

Micro-precision version: runout ≤ 0.005 mm

Fixed, adjustable (Traub) and Magic guide bushes

Catalog (PDF) →

Collet

Dead length collets

The collet does not move axially when it closes, so the part length stays accurate.

From Ø0.3 mm, smaller on request

UP (≤ 0.01 mm) and MP (≤ 0.005 mm) accuracy

Smooth, grooved, Supergrip or carbide-coated clamping surface

Catalog (PDF) →

Collet

Draw-in collets

Collets closed by pulling, also with extended nose.

From Ø0.3 mm

UP and MP accuracy

Available with carbide insert

Catalog (PDF) →

Collet chuck

Collet chucks

Collet chucks with smooth or grooved bore, for single and multispindle lathes.

SPK32 to SPK100

Also for multispindles, e.g. INDEX MS

Square and hexagon profile on request

Catalog (PDF) →

Tool holding

ER collets

Tool-holding collets from ER8 to ER60, in standard and UP accuracy.

Sealed for internal coolant, MD version up to 130 bar

Tapping collets, also with square drive

Also as sets in wooden cases

Catalog (PDF) →

Bar feeding

Bar loader collets

Collets for bar feeder pushers, with revolving ends.

Ø1.5–35 mm, square and hexagon profile on request

Also for the LNS Tryton

Revolving ends, e.g. for Robobar

Catalog (PDF) →

Schaublin

Highlights from the Schaublin range.

Schaublin has made collets in Switzerland since 1915 and developed the W, B and ESX collet types.

Workpiece collets

Dead length (F) and pull-type collets with external (W, B, L) or internal thread (P).

For Hydromat machines (HW, HB)

Emergency collets to machine yourself

Step collet blanks, expanding arbors

Feed fingers and accessories

Type A feed fingers, plus rubber seals, depth stops and set-up keys.

Feed fingers for bar stock

Rubber seals and adjustable depth stops

Set-up key for 3-slot collets

SRS runout adjustment

Schaublin's SRS system lets you fine-adjust the runout of the collet chuck.

More accurate concentricity on the machine

With adaptors for several clamping systems

Tool holding

Tool holders and tool-holding collets for high-speed machining.

HSK, ISO and BT tool holders

ECR quick-change system, Tornos DECO basic holders

ESX, EX and HSC (D) tool collets

Why it matters

Precision starts with clamping.

A worn collet or bush causes runout, poor surface finish and dimensional variation. The time spent on replacement pays for itself many times over in reduced scrap.