Request a quote

CNC machine accessories / Bar feeding

Alpha · Express · Sprint · Ultra · Tryton

Long bar feeders

Automatic bar feeders for 3–4 m bars, for Swiss-type lathes and CNC lathes. Guide channels guide the bar precisely, so the bar stock runs vibration-free even at high speeds.

LNS Alpha 565

12

models, from Alpha to Tryton

Ø0.5–80 mm

bar diameter across the range

3–4 m

bar length

2 min

partial changeover on most models

5 families

from Swiss-type lathes to large diameters

When is it the right choice?

Full-length bars, unattended.

Where parts are made from 3–4 m bars in large batches over long shifts, a long bar feeder is the most cost-effective solution: fewer remnants, less frequent reloading, continuous machine time.

We select the family based on the machine type, the headstock (fixed or sliding) and the bar diameters, and we integrate it with your machine.

Not sure whether you need a short or a long bar feeder? Comparison →

Applications

Swiss-type lathes (sliding headstock)

Fixed-headstock CNC lathes

Medium and large batches

Unattended, overnight operation

Benefits

Hydrodynamic guiding for vibration-free machining

Fast, partly automatic changeover

Machine-specific interface and installation

Service and spare parts nationwide

Models

The right family for your machine and bar diameter.

Alpha

Reliable all-rounders from Swiss-type lathes to large diameters, Ø0.5–67 mm.

LNS Alpha 04

Micro diameters

Alpha 04

For Swiss-type lathes, from 0.5 mm bars. Two guiding channels as standard, no magazine setup.

Bar diameter

Ø0.5–4 mm

Bar length

2000 mm

Catalog (PDF) →

LNS Alpha 112 S3

Entry-level model

Alpha 112 S3

Simple, compact bar feeder for small bars, for fixed and sliding headstock lathes.

Bar diameter

Ø1–12 mm

Bar length

3200 mm

Catalog (PDF) →

LNS Alpha 320 S3

Small to medium diameters

Alpha 320 S3

Servo drive and hydrodynamic guiding. Feed force and speed are set automatically from the entered bar diameter.

Bar diameter

Ø3–23 mm

Bar length

3200 / 4200 mm

Catalog (PDF) →

LNS Alpha 342 S2

For Swiss-type lathes

Alpha 342 S2

Polyurethane guiding elements on a rigid steel frame for vibration damping, tool-free changeover in 2 minutes.

Bar diameter

Ø3–42 mm

Bar length

3300 / 4400 mm

Catalog (PDF) →

LNS Alpha 552

Medium diameters

Alpha 552

Automatic torque and speed adjustment, two-position pneumatic front rest, tool-free changeover.

Bar diameter

Ø5–52 mm

Bar length

3200 / 4200 mm

Catalog (PDF) →

LNS Alpha 565

Large diameters

Alpha 565

For medium and large series, with a reinforced base for stability and vibration damping.

Bar diameter

Ø5–67 mm

Bar length

1000–3300 / 4200 mm

Catalog (PDF) →

Express

Hydrodynamic guiding and fast changeover for fixed and sliding headstock lathes, Ø0.8–46 mm.

LNS Express 112+

For Swiss-type lathes

Express 112+

The smallest footprint in its class, hydrodynamic guiding over the whole diameter range.

Bar diameter

Ø0.8–12 mm

Bar length

2200 / 3200 mm

Catalog (PDF) →

LNS Express 126

Dual loading

Express 126

For small and medium bars, with guiding tubes or an automatic front rest and a SMART HMI.

Bar diameter

Ø1–26 mm

Bar length

1300–3200 / 4200 mm

Catalog (PDF) →

LNS Express 346 evo

Fully automatic

Express 346 evo

Just enter the bar diameter: all mechanical elements and parameters are set automatically.

Bar diameter

Ø3–46 mm

Bar length

3200 / 4020 mm

Catalog (PDF) →

Sprint · Ultra · Tryton

For special tasks: vertical magazine, heavy bars, cam-controlled automatics.

LNS Sprint 565 S2+

Vertical magazine

Sprint 565 S2+

Vertical chain loading: heavy bars do not have to be lifted to machine height.

Bar diameter

Ø5–65 mm

Bar length

2200–4200 mm

Catalog (PDF) →

LNS Ultra 80

Heavy bars

Ultra 80

For bars over 160 kg: 700 kg mineral-cast beam, self-adjusting front rest without changing guiding elements.

Bar diameter

Ø12–80 mm

Bar length

3200 / 4200 mm

Catalog (PDF) →

LNS Tryton 112+

For CNC and cam lathes

Tryton 112+

Hydraulic feed in closed, oil-filled guide tubes, with a swing-out unit and hybrid barrel.

Bar diameter

Ø1–12.7 mm

Bar length

2100–4200 mm

Catalog (PDF) →

Selection

How to choose a bar feeder?

The right bar feeder starts from the machine and the part: fixed or sliding headstock, the bar diameters and lengths you run, the spindle speed, and how often you change over.

We assess your machine and production task, then recommend the LNS bar feeder model and the matching spindle liners.

Criteria

Fixed or sliding headstock

Bar diameter range and bar profile

Bar length: 3 m or 4 m

Spindle speed and vibration damping

What you get from us

On-site assessment and model recommendation

Machine-specific interface

Installation and operator training

Local service, fast spare parts supply

In action

Express 346 evo: changeover at the push of a button.

The manufacturer's video shows how the bar feeder sets itself up for a new diameter.

Automatic setup after entering the bar diameter

Automatic front support directly behind the spindle

Redesigned spine beam with better damping

From the manufacturer

Detailed technical data and the full LNS bar feeder range on the manufacturer's website.

Related products

Good to pair with.

Which bar feeder fits your machine?

Send us your machine model, bar diameters and bar length, and we'll make a recommendation within 1 day.