CNC machine accessories / High-pressure coolant and filtration
ChipBlaster · B · S · U
High-pressure coolant
Coolant delivered at high pressure directly into the cutting zone breaks up and flushes away chips, cools the cutting edge, and enables faster, more reliable machining.
Chip breaking
with high-pressure coolant
35–140 bar
pressure
max. 30 l/min
flow rate
3 series
B · S · U, with chiller
±0.5 °C
temperature control (CC 10K SA)
When is it the right choice?
Where chips set the pace.
In deep-hole drilling, grooving and parting off, chips jam, the tool heats up and the machine has to slow down. With targeted high-pressure coolant, chips stay short, the cutting edge stays cool, and the machine can run at full speed.
Applications
Lathes and machining centers
Deep-hole drilling, grooving, parting off
Tools with through-tool coolant
Benefits
Controlled chip breaking
Longer tool life
Shorter cycle times, better surface finish
Series
The right high-pressure system for your machine.
All they need is a coolant connection and a machine interface. The compact versions can be installed next to or under the bar feeder.
Compact, fixed pressure
B-Series
Pressure
35 or 70 bar
Flow rate
max. 30 l/min
Outlets
1 or 4
Filtration
1 or 2 cartridges, down to 10 µm
Tank
none
Next to the bar feeder
S-Series
Pressure
70 or 140 bar
Flow rate
30 / 22 l/min
Outlets
4 or 8
Filtration
dual cartridge, 10 or 5 µm
Tank
160 l
Under the bar feeder
U-Series
Pressure
max. 140 bar
Flow rate
max. 22 l/min
Outlets
4 or 8
Filtration
cartridge, 10 µm
Tank
80 l, for Swiss-type lathes
+
Chiller
Constant coolant temperature within ±0.5 °C (CC 10K SA), for emulsion and oil, with built-in filtration, so thermal expansion does not throw off part dimensions.
Demo
S-Series: compact, next to the bar feeder.
The manufacturer's video shows the design, the user interface and the filter change.
Touchscreen interface with preset pressure values
Duplex filter with switchover, filter change during operation
4 or 8 coolant outlets with individual control
From the manufacturer
Detailed specifications and the full ChipBlaster range on the manufacturer's website.
Related products
Good to pair with.
How much pressure does your machining need?
Tell us the machine type and your typical operations, and we'll recommend the right series and how to connect it within 1 day.
CNC machine accessories, tooling and automation for machining shops: sales, installation, service.
CNC machine accessories
Contact
Prevotex Hungary Kft.
Vegyész utca 19–25, 1117 Budapest, Hungary
© 2026 Prevotex Hungary Kft. All rights reserved. Product and brand names are the property of their respective manufacturers.
Imprint · Privacy policy · Cookie policy