CNC machine accessories / Bar feeding
Alpha · Express · Sprint · Ultra · Tryton
Automatic bar feeders for 3–4 m bars, for Swiss-type lathes and CNC lathes. Guide channels guide the bar precisely, so the bar stock runs vibration-free even at high speeds.
12
models, from Alpha to Tryton
Ø0.5–80 mm
bar diameter across the range
3–4 m
bar length
2 min
partial changeover on most models
5 families
from Swiss-type lathes to large diameters
When is it the right choice?
Where parts are made from 3–4 m bars in large batches over long shifts, a long bar feeder is the most cost-effective solution: fewer remnants, less frequent reloading, continuous machine time.
We select the family based on the machine type, the headstock (fixed or sliding) and the bar diameters, and we integrate it with your machine.
Not sure whether you need a short or a long bar feeder? Comparison →
Applications
Swiss-type lathes (sliding headstock)
Fixed-headstock CNC lathes
Medium and large batches
Unattended, overnight operation
Benefits
Hydrodynamic guiding for vibration-free machining
Fast, partly automatic changeover
Machine-specific interface and installation
Service and spare parts nationwide
Models
Reliable all-rounders from Swiss-type lathes to large diameters, Ø0.5–67 mm.
Micro diameters
For Swiss-type lathes, from 0.5 mm bars. Two guiding channels as standard, no magazine setup.
Bar diameter
Ø0.5–4 mm
Bar length
2000 mm
Entry-level model
Simple, compact bar feeder for small bars, for fixed and sliding headstock lathes.
Bar diameter
Ø1–12 mm
Bar length
3200 mm
Small to medium diameters
Servo drive and hydrodynamic guiding. Feed force and speed are set automatically from the entered bar diameter.
Bar diameter
Ø3–23 mm
Bar length
3200 / 4200 mm
For Swiss-type lathes
Polyurethane guiding elements on a rigid steel frame for vibration damping, tool-free changeover in 2 minutes.
Bar diameter
Ø3–42 mm
Bar length
3300 / 4400 mm
Medium diameters
Automatic torque and speed adjustment, two-position pneumatic front rest, tool-free changeover.
Bar diameter
Ø5–52 mm
Bar length
3200 / 4200 mm
Large diameters
For medium and large series, with a reinforced base for stability and vibration damping.
Bar diameter
Ø5–67 mm
Bar length
1000–3300 / 4200 mm
Hydrodynamic guiding and fast changeover for fixed and sliding headstock lathes, Ø0.8–46 mm.
For Swiss-type lathes
The smallest footprint in its class, hydrodynamic guiding over the whole diameter range.
Bar diameter
Ø0.8–12 mm
Bar length
2200 / 3200 mm
Dual loading
For small and medium bars, with guiding tubes or an automatic front rest and a SMART HMI.
Bar diameter
Ø1–26 mm
Bar length
1300–3200 / 4200 mm
Fully automatic
Just enter the bar diameter: all mechanical elements and parameters are set automatically.
Bar diameter
Ø3–46 mm
Bar length
3200 / 4020 mm
For special tasks: vertical magazine, heavy bars, cam-controlled automatics.
Vertical magazine
Vertical chain loading: heavy bars do not have to be lifted to machine height.
Bar diameter
Ø5–65 mm
Bar length
2200–4200 mm
Heavy bars
For bars over 160 kg: 700 kg mineral-cast beam, self-adjusting front rest without changing guiding elements.
Bar diameter
Ø12–80 mm
Bar length
3200 / 4200 mm
For CNC and cam lathes
Hydraulic feed in closed, oil-filled guide tubes, with a swing-out unit and hybrid barrel.
Bar diameter
Ø1–12.7 mm
Bar length
2100–4200 mm
Selection
The right bar feeder starts from the machine and the part: fixed or sliding headstock, the bar diameters and lengths you run, the spindle speed, and how often you change over.
We assess your machine and production task, then recommend the LNS bar feeder model and the matching spindle liners.
Criteria
Fixed or sliding headstock
Bar diameter range and bar profile
Bar length: 3 m or 4 m
Spindle speed and vibration damping
What you get from us
On-site assessment and model recommendation
Machine-specific interface
Installation and operator training
Local service, fast spare parts supply
In action
The manufacturer's video shows how the bar feeder sets itself up for a new diameter.
Automatic setup after entering the bar diameter
Automatic front support directly behind the spindle
Redesigned spine beam with better damping
From the manufacturer
Detailed technical data and the full LNS bar feeder range on the manufacturer's website.
Related products
Send us your machine model, bar diameters and bar length, and we'll make a recommendation within 1 day.